Lehner Polaro Spreaders

Tailgate mounted and inbody spreaders
POLARO ® – perfectly equipped for winter service without a special vehicle With the POLARO ® , salt, grit, sand, but also fertilizer can be spread with almost any vehicle that is powered by 12 volts, e.g. B. Cars, pick-ups, trucks, wheel loaders, mini tractors or quads etc.

All the mounting holes required for the attachment are available in the frame of the POLARO ® . Thanks to the infinitely variable regulation of the spreader disc speed on the control unit, the spreading width can be continuously adjusted from 0.8 m (sidewalk) to 6 m (e.g. parking lot) while driving. The setting of the amount of spreading material is done manually with the POLARO ® .

  • Working width continuously adjustable from 0.8 – 6.0 m (optional up to 12 m)
  • Operation via the LAS control panel from the cab / driver’s seat
  • Stepless spread rate dosage – manually
  • Frame, slider and spreader plate are made of stainless steel as standard
  • Wiring in junction box, water-protected
  • The automatic starter loosens stuck grit
  • VA agitator made of stainless steel
  • 24 V operation possible using a voltage converter

OPTIONAL for container sizes 110 l and 170 l: Saline agitator for difficult-to-flow salt (e.g. very fine salt) available for an extra charge.

Polaro 70E

 

 

 

  • Hopper capacity: 70 l
  • Dimensions (LxWxH): 490 x 585 x 870 mm
  • Weight: 29 kg
  • Capacity, salt: approx. 90 kg
  • Spreading area: approx. 4,000 m²

 

 

 

 

  • Hopper capacity: 110 l
  • Dimensions (LxWxH): 490 x 585 x 1050 mm
  • Weight: 38 kg
  • Capacity, salt: approx. 140 kg
  • Spreading area: approx. 6,000 m²

Polaro 110E

Polaro 170E

 

 

 

 

  • Hopper capacity: 170 l
  • Dimensions (LxWxH): 690 x 610 x 1100 mm
  • Weight: 42 kg
  • Capacity, salt: approx. 220 kg
  • Spreading area: approx. 10,000 m²

 

 

 

 

  • Hopper capacity: 250 l
  • Dimensions (LxWxH): 785 x 670 x 1230 mm
  • Weight: 53 kg
  • Capacity, salt: approx. 325 kg
  • Spreading area: approx. 14,000 m²

Polaro 250E

In Body Mounted Spreaders

The POLARO® L and POLARO® XL gritters are ideal for finely dosed dispensing of grit, salt and sand, and fertiliser over large areas. Your vehicle does not need a hydraulic drive or cardan shaft. Simply mount the gritter on a vehicle with a loading bed, 12 V socket, and a sufficient payload, and off you go! If you wish to use the machine only for grit and sand, please state this in your order, and we will then install a reinforced screw conveyor. Whatever your spreading material, you can infinitely adjust the spreading width and rate directly on the control panel, and conveniently change the settings while on the move.

Perfectly equipped for winter: – Infinitely adjustable working width 0.8 – 6.0m (up to 12m as an option) – Control console for easy, user-friendly control of all functions from the driver’s seat (as standard) – Stepless adjustment of the spreading dosage – Polyurethane hopper with screw conveyor and vibrator with automatic start-up, for a constant material flow – All metal parts are of non-rusting stainless steel as standard – Water-tight cables and gear motors (IP67) – A transformer is required for 24V operation

Even more capacity with the (X)XL extension: For an additional payment, both POLARO® models are available with a hopper extension, which increases its capacity, e.g. for gritting salt, to approx. 750 kg on the POLARO® L and approx. 1,000 kg on the POLARO® XL.

Polaro L

 

 

 

  • Hopper capacity: 380 l
  • Dimensions (LxWxH): 1037 x 1056 x 820 mm
  • Weight: 140 kg
  • Capacity, salt: approx. 500 kg
  • Spreading area: approx. 25,000 m²

 

 

 

  • Hopper capacity: 550 l
  • Dimensions (LxWxH): 1394 x 1056 x 820 mm
  • Weight: 155 kg
  • Capacity, salt: approx. 720 kg
  • Spreading area: approx. 36,000 m²

Polaro XL

If you would like to know more please feel free to give us a call, pop into our shop or send us an email